RECORDING
51
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
RVCR’s external inputs.
1
Make sure the component you want to record from is connected properly to the DVD RVCR; see pages
15 and 19.
2
Use [
… †
] to select the external input to record from.
• Tuner: Built-in tuner
• LINE1 : Audio/Video on front panel
• LINE2 : Audio/Video Input on back panel
• DV: DV input on front panel.
3
Load a recordable disc or tape.
4
Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
5
Press [REC (
●
)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 46.
6
Press [STOP (
■
)] to stop recording.
Recording from External Components
50
Timer Recording
Note
• If your source is copy-protected, you will not be able to record it using the DVD RVCR. See ‘Copyright
Notice‘ on page 7 for more details.
Recording from an External Input
Recording from an External Input
Even if a Timer Recording is set, the DVD RVCR will not record if:
• No disc is loaded.
• A non-recordable disc is loaded.
• DISC Lock is set to ON in the DISC Settings menu; see page 53.
• There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
• A recording is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program starts.
• If two programs are set to start at exactly the same time, the program entered first takes priority.
Confirmation is not possible when:
• The DISC Protect setting is set to ON.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
Timer Recording Troubleshooting
You can clear a Timer Recording any time before the recording actually starts.
• Use [
…†
] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to
modify it. Use [
…†
] to select 'Delete' then press [ENTER].
Canceling a Timer Recording
After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 3
seconds.
Stopping a Timer Recording in Progress
Recording Priority
• Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual
recording. During manual recording Timer Recording or OTR will be ignored.
