Daedong KIOTI EX35 Скачать руководство пользователя страница 94

Страница: 94 / 238

description oF operating systeM

ex35(c)/ex40(c)/ex45(c)/ex50(c)

description oF operating systeM

ex35(c)/ex40(c)/ex45(c)/ex50(c)

The seat height can be adjusted to

adapt the seat to the driver’s figure.

Turning the lever (1) on the front bot

tom of the seat clockwise raises the

seat, while turning it counterclock

wise lowers the seat.

SEAT hEIGhT

(1) Seat Height Lever

H11O470A

To change the seatback angle, raise

the lever (1) on the left of the seat.

Then, adjust the seatback angle with

the lever pulled. Release the lever

after adjustment. Make sure that the

lever is returned and the seat is firm

ly fixed after adjustment.

SEATbACK REClINING

(1) Seatback Adjustment Lever

H11O469A

(1) Seat Adjustment Lever

To adjust the seat position, pull the

lever (1) to left under the front of the

seat, slide the seat to the desired po

sition, and then release the lever.
Make sure that the seat is firmly fixed

by moving it gently after adjustment.

H11O468A

SEAT ADjuSTMENT

SEAT SlIDING



Do not put a hand between the

seat and the slides when ad-

justing the seat position. You

can get injured unexpectedly.

CAuTION

M47-EU-04.indd 38

2012-04-06 오후 3:31:17

Содержание KIOTI EX35















































































































































































































































Результаты поиска

Содержание KIOTI EX35

Отзывы:

Daedong KIOTI EX35, Руководство пользователя, Страница: 94 / 238

Результаты поиска

Содержание KIOTI EX35

Отзывы: