Daedong KIOTI EX35 Скачать руководство пользователя страница 115

Страница: 115 / 238

description oF operating systeM

ex35(c)/ex40(c)/ex45(c)/ex50(c)

description oF operating systeM

ex35(c)/ex40(c)/ex45(c)/ex50(c)

T46w031A



Do not weld or apply heat to

the tire rim or disc. The tire

can explode due to the rapidly

increased pressure in the tire.



Check tires for inflation pres-

sure, damage, deformation,

and extended wear on lug and

damage of rim and disc. Also

check if wheel bolts, rim bolts,

and nuts are loose.

wARNING

Never operate tractor with a

loose rim, wheel, or axle.



Always tighten nuts or bolts

to the specified torque.



Make sure to frequently check

that all these parts are firmly

tightened.

Make sure to perform inspec-

tion daily.

TREAD

(1) Bolt

(2) Rim Bolt (3) Disc

H23O4D0A

When working on a field where crops

are linearly aligned, the tread should

be adjusted so that the tires do not

cross over the crops.
It is also necessary to widen wheel

tread to decrease danger when work

ing on slopes or hills, or when doing

trailer work, etc.

wARNING

M47-EU-04.indd 59

2012-04-06 오후 3:31:47

Содержание KIOTI EX35















































































































































































































































Результаты поиска

Содержание KIOTI EX35

Отзывы:

Daedong KIOTI EX35, Руководство пользователя, Страница: 115 / 238

Результаты поиска

Содержание KIOTI EX35

Отзывы: