23
Verifying the Setup
Verify the setup to ensure everything functions correctly:
1. Turn the power ON at the circuit panel or fuse box.
2. Assemble the filters if not already done so.
3. Insert the filters gently:
Be careful not to scratch the back of the grease
channel!
• Raise the front edge into the tension clip, and press
forward.
• Lift the
rear edge
up and above the grease channel.
Use caution not to scratch the filter against the grease
channel or scratch other parts of the unit or filters.
• Set the rear edge onto the grease channel.
4. Turn the
LIGHTS
knob. Twist the knob half-way around
for the lights to illuminate.
5. Turn the
LIGHTS
knob in
the opposite direction to turn
the lights off.
6. Turn the
FAN
knob. The fan(s) will start at maximum
speed and decrease as you continue.
7. Turn the
FAN
knob in
the opposite direction to turn the
fan(s) off.
If the RNIVS Fails to Function Correctly:
1. Verify that power is supplied to the RNIVS via the out-
let, circuit breaker, or another main power source.
2. Make sure the electrical supply has not been disrupted
by a blown fuse or problems in the outlet or service.
3. Check the electrical connections to ensure that the
wiring installation has been completed correctly.
4. Repeat the above steps.
• If the RNIVS still does not work, contact Dacor
Distinctive Service at (800) 793-0093 ex. 2822.
• Do not attempt to repair the appliance yourself.
• Dacor is not responsible for service required to correct
a faulty installation.
Installation Instructions
FAN
knob
LIGHTS
knob
Control Panel
Dacor Replacement Parts
Part Number
Description
702579
Baffle Style Filter Kit
(1 Hardware)
702580
Baffle Style Filter Kit
(2 F Hardware)
702666
Dimmable LED Bulb Kit
(1 Bulb + Suction Cup)
700975
Halogen Bulb Kit
(1 Bulb + 1 Suction Cup)
BACK
tension
clip
Filter
Grease channel
FRONT
Control Panel
Inserting Filters: Front Edge
Inserting Filters: Rear Edge
