15
Installation Instructions
Cooktop Assembly
WARNING
Never attempt to operate the range’s cooktop with any of the
burner rings, burner caps or grates removed.
Remove the burner rings, burner caps and grates from their
shipping packages.
SimmerSear Burner Assembly
Install the SimmerSear burner ring on top of the SimmerSear
1.
burner base. Line up the indentations on the bottom of the
burner ring with the pins on the top of the burner base.
Set the outer SimmerSear burner cap on top of the burner
2.
ring. Make sure the burner ring is centered on top.
Set the inner SimmerSear burner cap on the center of the
3.
dual burner base. Line up the ridge on the bottom of the cap
with the pins on the center of the burner base.
Standard Burner Assembly
Install the standard burner rings on the standard burner
1.
bases according to size. Put the hole on the edge of each
ring over the igniter. Center the tabs on the bottom of each
ring in the hole in the center of each base.
Install all the standard burner caps. The ridge on the bottom
2.
of each cap must surround the top of each ring.
SimmerSear Burner Assembly
Standard Burner Assembly
Burner
ring
Burner
ring
Pin on burner
base
Igniter on
burner base
Igniter hole
Outer burner
cap
Inner burner
cap
SimmerSear
burner
Standard
burner
Grates
Spill tray
Ridge on
bottom of
burner cap
Ridge on bottom of
on inner burner cap
