Aluminum tape
Motor cover
Vent chassis
5
Product Specifications
Product Dimensions:
MRV30
15
-ER,
MRV36-ER, MRV48-ER
30 1/4"
(76.8 cm)
to
37 1/4"
(94.6 cm)
30"
(76.2 cm)
18 5/8”
(47.3 cm)
5/16” (8 mm)
thick stiffener
across back
3 3/4"
(9.5 cm)
1"
(2.5 cm)
28" 3 prong
grounded
power cord
Vent shown
in raised
position
Product
data label
Motor
cover
Front of unit
6"
(15.2 cm)
2 9/16"
(6.5 cm)
2 1/2"
(6.4 cm)
1 15/16"
(4.9 cm)
B
A
Adjustable
anchor legs
2 13/16"
(7.1 cm)
1/4"
(6 mm)
Top cap with
vent down
Tolerances: ±1/16”, (±1.6 mm) unless otherwise stated
*
See Pg. 9 for exhaust
locations/dimensions.
*Max height of downdraft
vent must not exceed
cooking appliance’s max.
specified counter height.
(See cooking appliance’s
installation instructions.)
IMPORTANT
INSTALLER:
To ensure the cooking unit performs properly, seal
all seams around the motor cover
where
it contacts the vent
chassis with aluminum tape. (See the graphic below for motor
cover location.)
To close the gap between the Range and the Downdraft,
install this
trim
bracket behind the range with the included
hardware.
C
Model Number Top Cap Width (A) Chassis Width (B) Height (C)
Trim Part No.*
MRV3015-ER
30” (76.2 cm)
26 3/8” (67.0 cm) 15” (38.1 cm)
115044
MRV36-ER
36” (91.4 cm)
33 3/8” (84.8 cm) 15” (38.1 cm)
115086
MRV48-ER
48” (121.9 cm)
43 3/8” (110.2 cm) 10” (25.4 cm)
115087
