Dacor HDPR48S, Руководство по установке

Страница: 19 / 36

19 English
Installation Requirements
Electrical Requirements
Follow these directions to reduce risk of property damage, personal injury, or death.
The owner shall ensure that the electrical service meets requirements and that the electrical outlet is properly
grounded and installed by a licensed electrician.
The correct voltage, frequency, and amperage must be supplied to the range from a separate, grounded,
circuit protected by a proper-size circuit breaker or time-delay fuse. (Fuses: fuse both sides of the line (L1, L2).
• The wiring must be long that the range can be pulled out for service without being disconnected.
•
Wiring to the range must:
– meet NEMA standards and have a minimum rating of ? Volts @ ? Amps for models HDPR30S/
HDER30S; 250 Volts @ 30 Amps for models HDPR36S/HDER36S; and 250 Volts @ 50 amps for models
HDPR48S/HDER48S
– include a strain relief
– be terminated by tinned leads, closed-loop terminals, or open-ended spade lugs with upturned ends
– connect to a junction box or receptacle installed by a licensed electrician
Connect the range via electical conduit or power cord.
• Conduit
– A 4-wire conduit connected to a 4-wire junction box
or, where local code permits (excludes new branch-circuit installations):
– A 3-wire conduit connected to a 3-wire junction box.
Suggested wiring color code: Black, white, red and green.
• Using an appliance cord:
– A 4-wire appliance cord equipped with a NEMA 14-50P plug connected to a NEMA 14-50R receptacle, or
– A 3-wire appliance cord (where local code permits) equipped with a NEMA 10-50P plug connected to a
NEMA 10-50R receptacle
– Appliance cord plug must be UL listed type SRD or SRDT.
Model Required Circuit Total Connected Load
HDPR30S, HDER30S ? Vac*, ? Hz, ? Amp. ? kW (? Amp.)
HDPR36S, HDER36S 240 Vac*, 60 Hz, 30 Amp. 5.75 kW (24.0 Amp.)
HDPR48S, HDER48S 240 Vac*, 60 Hz, 50 Amp. 10.1 kW (41.9 Amp.)
*4-wire, two 120 Vac hot (L1 and L2), one neutral, one ground; these ratings are for reference only;
see the range's data label (back of range) for exact specifications.