Dacor HDER30C/LP, Руководство по установке

Страница: 17 / 36

17 English
Installation Requirements
Location Requirements
Gas/Electrical Range Hookups (HDPRS/HDERS 30”, 36”, 48”)
Gas/Electrical Service Inlets
• Existing utilities may be used if compatible with the requirements in this manual. (See building codes for
allowed gas-valve locations.)
• An external shut-off valve must be installed between the gas inlet and range so its gas supply can be turned
on/off.
• The valve and the circuit-breaker panel/fuse box must be accessible without moving the range.
• The gas-supply piping, shut-off valve, and the electrical junction box/receptacle must not interfere with the
placement requirements for the range.
• The junction box and gas-shut off valve must be located so the range can be pulled out for service without
being disconnected.
GAS-/ELECTRICAL-ACCESS DIMENSIONS
Model A B* C D* E**
HDPR30S/HDER30S 3 ¼" (8.3 cm) 27” (68.6 cm) 6 3/4" (17.1 cm)
6 3/4 (17.1 cm) 7/8” (2.2 cm) dia. HDPR36S/HDER36S 6 3/4" (17.1 cm) 27” (68.6 cm) 12” (30.5 cm)
HDPR48S/HDER48S 4 ¼” (10.8 cm) 27” (68.6 cm) 9” (22.9 cm)
*Measurement with range legs adjusted to their lowest height; **the hole size for the electrical wiring may be increased to 1 1/8” (2.9
cm) by removing the conduit bracket in the bottom of the electrical box.
48” model shown