Installation Instructions
Adjusting and Installing the Included Toe Kick
The the height and depth of the included toe kick are
adjustable.
Adjust the toe kick height. The
typical toe kick height is 4”
high. For other than a typical
installations, remove the rear
assembly screws that hold the two
toe kick sections together. Adjust
the toe kick sections to match
your desired toe kick height and
reinstall the assembly screws.
Snap the toe kick into the toe kick
mounting plate.
Install the entire toe kick assembly
by inserting the depth adjustment
pins into the chassis and pushing straight back on
both sides until the front of the toe kick aligns with the
adjacent cabinet toe kick.
Installing a Custom Toe Kick (Model ID30)
See the
Custom Panel Installation Template
(Dacor PN
101394) for complete installation instructions of a custom
toe kick panel. Use the included stainless steel toe kick as
a mounting surface.
Apply high tack double stick tape to the front of the
stainless steel toe kick.
Attach the custom toe kick to the stainless steel toe
kick. If necessary, screw holes are provided through the
front of the toe kick for material purposes.
Snap the toe kick assembly into the toe kick mounting
plate.
Install the entire toe kick assembly by inserting the
depth adjustment pins into the chassis and pushing
straight back on both sides until the front of the toe kick
aligns with the adjacent cabinet toe kick.
1.
2.
3.
1.
2.
3.
4.
Adjustment
Pins
Toe Kick
Mounting
Plate
Door
Side of
unit