Dacor CM24T, Руководство по установке

Страница: 8 / 16

Pressure
Regulator
Output
Pressure
Adjustment
Control
Knob
Pressure Gauge
Quick-Release
Fitting
Flow Direction
Arrow
Quick-Release
Fitting
Gauge O-ring
(black)
Pressure Regulator Assembly
• Install the pressure regulator bracket in the upper left or
right rear corner by removing and utilizing the screw on
the rear of the unit as shown.
• Mount the pressure regulator on the bracket.
p
lumbIng
I
nstallatIon
(Model CM24P Only)
CAUTION
To prevent damage to the coffee system due to hard water, prior
to installation check the water hardness for building where you
will be installing the coffee system (see page 3). If necessary
have a qualified water treatment specialist install a water
treatment system. The water treatment system must be installed
between the house plumbing and the coffee system regulator.
• Remove all of the parts from the regulator kit
packaging. The kit includes 4mm (5/32”) Teflon hoses,
a pressure regulator, three quick-release fittings, a
pressure gauge, and a mounting bracket.
• Assemble the pressure regulator gauge, gauge O-ring,
and two of the quick-release fittings as shown.
Pressure Regulator Mounting
Control Knob
• Remove the coffee system from the packaging and
inspect it for damage. Do not install a damaged
system.
• Insert the steam barrier into the cut-out. Push it all the
way to the back so that the back of it lines up with the
back wall of the cabinet.
• Attach it with the eight provided screws.
Steam Barrier Installation
Steam Barrier
(provided)
Screw 8 places
(provided)
I
nstallatIon
I
nstructIons
s
team
b
arrIer
v
erIfyIng the
p
ackage
c
ontents
• Use & care manual
• Steam barrier with 8 (M4.5 X 20 round head) mounting
screws
• 2 glide assemblies with (M5 X 6) mounting screws
• 6 metal shims, 1/16” (1mm)
• Detergent tablets (sample)
• Pressure regulator (model CM24P only)
• Pressure regulator bracket (model CM24P only)
• Pressure gauge (model CM24P only)
• Regulator gauge O-ring (model CM24P only)
• 3 piece 1/4” compression fitting and 1/4-16 BSPP male
thread quick release fitting (model CM24P only)
• Teflon tubing (model CM24P only)
• Spare tank O-ring (model CM24T only)
• Spare piston assembly O-ring
• Allen wrench (for grinder adjustment)
• Liquid detergent (sample)
• Anti-liming powder (sample)
• Measuring cup for ground coffee
• Cleaning brush
• Keys (located inside the left slide-out compartment)