Dacor Built-In Dishwasher, Руководство по обслуживанию

Страница: 19 / 34

Page 4-2
s
eCTion
4 - s
erviCe
& D
isasseMbly
Dispenser
Disconnect dishwasher from power supply.
Remove outer door panel (see previous section for
detailed instructions).
Remove six screws securing dispenser assembly to
inner door panel. Retainer brackets on the top and
bottom may also need to be removed.
Lower Access Panel
Remove bottom kick plate.
Remove screws on each side of lower access panel.
(See Figure 25)
Remove access panel.
EDGES ARE SHARP - USE EXTREME CAUTION
Door Latch/Door Switch
Remove outer door panel. (See previous section for detailed instructions.)
Remove two screws mounting the latch/switch assembly to inner door panel, and then
remove two wires.
Reinstall wires to door latch/switch assembly and remount assembly to inner door panel.
Close door to make sure strike catches latch cam to close door switch.
If door strike needs to be adjusted, loosen retaining screw in top of tub. This allows strike
to be moved as needed. Tighten retaining screw after adjustment is made.
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
5.
FIgURE 24
FIgURE 25
Remove these screws
FIgURE 26
FIgURE 27
Latch cam in
open position