Dacia Solenza 2004, Руководство по ремонту

Страница: 633 / 891

86
86 - 3
AUTO RADIO
Radio tuning on a transmitter
The radio receiver is using three selection modes that may be seen on the screen and ap-
proached on the radio front side:
- manually ( TUNER MANU )
- by pre-selection (TUNER PRESEL)
- in alphabetical order (LIST)
Program memorizing
After the desired waves range has been selected (UL, UM or FM) and the transmitter
reception is established, its memorizing may be performed, by pushing on of the yes from 1 to 6,
for at least two seconds, when an acoustic signal confirming the memorizing is to be heard.
Thermal protection
If the radio temperature is too high for an optimal operation, the volume is automatically
reduced ( without modification of the volume on the display ).
Code protection
The radio is protected by means of a four-digit code. This code is introduced by the radio
keys at each battery disconnection.
Code introduction by means of the radio keys : in order to valid one digit introduction,
push the next key (see the Operation technical book).
In case of a wrong code, the radio is getting blocked (one minute for the first error, two
minutes for the second error, four minutes for the third…)
After first code introduction, some configurations must be programmed (see chapter”
configuration”). These are remaining programmed till battery disconnection.
REMARK: the return to the “wave jammer” mode is possible by simultaneously push-
ing of the keys 2 and 5 putting the radio under tension. Wait then for two minutes.
Programming
OBSERVATION:
In order to select the operation area of the radio receiver, simultaneously push keys
2 and 5, putting so the radio under tension. Wait then for about two minutes. Introduce
the four digits code, then :
General
vnx.su