Dacia Solenza 2004, Руководство по ремонту

Страница: 48 / 891

ENGINE
E7J-262
10
ENGINE ASSEMBLY
10 - 23
Dismount:
- cylinder head cover;
- intake manifold and exhaust manifold;
- cylinder head screws, less the one with
the centering bushing, that shall be only loosed;
- rotate the cylinder head around the
not-dismounted screw by easy hammering by
means of a rubber hammer.
- dismount the cylinder head;
- mount the jackets maintaining device
MOT 484
or the clamps
MOT 588.
Dismounting – Remounting
MOT 484
Dismount :
- rocker’s ramp;
- camshaft sealing ring;
- camshaft gear (to be blocked by
means of
MOT 799-01
device);
- camshaft;
- thermostat support;
- spark plugs;
- valves springs;
- valves;
- valves oil sealing rings, by means of
the
MOT. 1335
pliers.
Clean the cylinder head by removing the
stacked gasket.
It is very important not to scratch the
cylinder head on gasket seating face.
The
Decapjoint
product is to be used
for removing the remaining gasket stacked
pieces.
Apply the product on the area to be
cleaned, wait for about
10 minutes
, and then
clean with a wooden spatula.
During this operation protection gloves are
to be used.
vnx.su