17
The main P.C.CBOARD is the main electronic control board, this is a very sensitive piece of equipment and
must be handled with extreme care. The electronic components that are found on the board are sensitive to
static electricity and should not be handled or tampered with unless by an authorized D.A.C.E. agent. It is safe
to connect electrical wiring to the wiring connectors on the board, but this must be done according to the in-
structions in this manual. It is very important to remember to disconnect ALL power before connecting or dis-
connecting any wiring.
MAIN P.C.BOARD LAY-OUT
L.E.D. extension connector
Rev Counter connector
Marker connector
Current Sensing pots
Auxiliary connectors
Infra Red jumper
Program jumper
Open /Close / Status L.E.D.
Learn / Erase remote jumpers
Test button
Motor wire connectors
20 amp motor fuse x 2
16 Volt AC connector
from transformer
Earth wire
Green and Yellow
Battery wires
Red and Black
Light / Lock connector
Dipswitches
L.C.D. screen connector
On board receiver
