dabotek BS108, Руководство по эксплуатации

Страница: 14 / 41

SETTING UP & WELDING
SETTING UP & WELDING
After setting the chuck, insert it into the
pistol chuck holder and push firmly home
until it comes to a rest.
Tighten the chuck locking nut with the
box spanner provided. A gentle pressure
is all that is required. Over tightening
may result in damage to your pistol.
SETTING THE PISTOL
STANDARD CONTACT PISTOL
—
CDK1
Set the pistol spring preload to the appro-
priate setting for the welding task to be per-
formed. (See the tables on pages 16
-
22).
STANDARD LIFT GAP PISTOL
—
CDH1
Set the pistol lift to the appropriate setting for
the welding to be performed (See the tables on
pages 16
-
22.
(This works only for BS2XX series.)
This is achieved by placing the pistol in the
welding position thereby pushing the tip of
the weld stud back level with the end of
the tripod legs / nosecone.
Whilst the pistol is being held firmly in this
position twist the rear end cap of the pistol
clockwise until the motion becomes stiff.
12