dabotek BS108, Руководство по эксплуатации

Страница: 15 / 41

SETTING UP & WELDING
SETTING UP & WELDING
SETTING THE PISTOL (CDH1)
LIFT GAP PISTOL (CONTINUED)
It is at this point that further twisting of the
end cap begins to lift the tripod legs/
nosecone away from the plate.
The pistol is now in the zero lift position
and twisting the rear end cap anti
-
clockwise by one "click" at a time will increase
the lift by 0.25 mm increments (see the tables
on pages 16
-
22 for suggested settings).
Switch the controller ON.
Select the required welding
voltage by turning the se-
lector knob. The voltage is
adjustable between 35
and 200 volts in 1 volt
steps.
13