dabotek BS108, Руководство по эксплуатации

Страница: 18 / 41

WELD SETTINGS
The following pages (17 to 22) detail the suggested settings for the
following models:
BSXX8, BSX10 & BSX12 both Contact & Lift Gap
The setting charts were established with the performance of repeti-
tive weld tests using the standard equipment's specified above, studs
manufactured to the BS EN ISO 13918 standard, in the following ma-
terials :
Mild Steel, Grade St37
-
3
Stainless Steel, Grade 1.4303
Aluminium Alloy, Grade AlMg3
and sheet materials of the following types :
1.6 mm Thick, Mild Steel, Grade CR4
1.6 mm Thick, Stainless Steel, Type S304
1 mm Thick, ZINTEC Coated Mild Steel, Grade CR4
1.6 mm Thick, Aluminium Alloy, Grade HE3, Half Hard
The settings are given only as a general guide and it is recommend-
ed that sample welds be carried out on your own material, as quality
of materials and site conditions may vary from user to user.
16