ENGLISH
20
The impeller may have sharp edges – wear protective gloves.
If stored outside the limits indicated, pay particular attention to the conditions of the mechanical seal, the O-rings, the oil and the
cable gland.
4. IDENTIFICATION
4.1 Nameplate
The nameplate states the operating data and approvals applying to the pump.
The identification plate is applied on the top of the motor body, next to the handle.
Pos.
Description
Fig. 3
Nameplate
1
Pump Designation
2
Serial number
3
Model Code
4
Weight (with 10m cable)
5
Maximum liquid temperature
6
Range of flow
7
Range of head
8
Maximum head
9
Min. head
10
Rated power at the shaft
11
Rated input power
12
Enclosure class to IEC
13
Insulation class
14
Rated voltage
15
Rated current
16
Frequency
17
Capacitor capacity (not applicable)
21 Country of production
18
Number of phases
22 Maximum installation depth
19
Rated speed
23 Marking Ex/Quality marks
20
Level of duty
24 CE mark
4.2 Information on products with the Ex marking
Marking:
CE 0477 II2G
Ex db h IIB T4 Gb
EPT 16 ATEX 2440 X
0477:
code identifying the body that checks the production site;
explosion-proof appliance designed for use in a potentially explosive atmosphere;
II: group.
identifies an electrical appliance for use in an environment other than mines with possible presence of firedamp;
2: category.
pump designed for use in places where it is probable that there will be explosive atmospheres caused by
mixtures of air and gas, vapours or mists, or mixtures of air and dust;
G: gas.
the pump is protected in environments with gas, vapours or inflammable mists;
EX:
explosion-proof appliance designed for use in a potentially explosive atmosphere;
db:
electrical constructions for potentially explosive atmospheres – Explosion-proof housings “d”;
h:
non electrical constructions for potentially explosive atmospheres – Protection with immersion in liquid “h”;
IIB:
characteristic of the gas for which the appliance is intended;
T4:
corresponds to 135
℃
, and is the maximum surface temperature that can be safely reached by the pump;
X
The letter “X” on the certificate indicates that the appliance is subject to special conditions for safe use. The
conditions are mentioned in the certificate and in the installation and operating instructions.
Gb:
Level of protection of the appliances, appliances for explosive gas atmospheres having a “HIGH” protection level.
Marking for explosion-proof versions according to the IECEx scheme
Marking: CE xxxx Ex db h IIB T4 Gb IECEx EUT 16.0003X
Ex
Area classification according to AS 2430.1.
db
Flame protection in compliance with IEC 60079-1:2014.
h:
Non electrical constructions for potentially explosive atmospheres – Protection with immersion in liquid “h”;
IIB
Suitable for use in explosive atmospheres (not in mines).
Gas classification, see IEC 60079-0:2004, Attachment A. Gas group B includes gas group A.
T4
The max. surface temperature is 135°C according to IEC 60079-0.
X
The letter “X” on the certificate indicates that the appliance is subject to special conditions for safe use. The conditions are
mentioned in the certificate and in the installation and operating instructions.
Gb
Appliance protection level.
