DAB E.sybox 30, Инструкция по установке и обслуживанию

Страница: 77 / 934

ENGLISH
74
GB
e.sybox
setting
e.sybox response
No control
unit asso-
ciated
Control unit associated
Communication with control
unit
No commu-
nication with
control unit,
or control
unit error
Safety mode
Function
activated
(by means
of input or
menu)
Function not
activated
(by means
of input or
menu)
In=0
Input func
-
tion disabled
No action No action No action No action
In
(2)
=1, 2
Low water level
indicated by
float switch
No action System in
stop status F1
No action System in
stop status
(1)
in (2) =3, 4
Pauxn auxiliary
setpoint
No action Activation of
correspond
-
ing auxiliary
setpoint
No action Activation of
lowest auxil
-
iary setpoint
pressure set
in
(2)
=5, 6
Disable system
No action System in
stop status F3
No action System in
stop status
(1)
in
(2)
=7, 8
Disable system
+ fault and
warning reset
No action System in
stop status
F3 + fault and
warning reset
No action System in
stop status
(1)
in =9
Fault and warn
-
ing reset
No action
Fault and
warning reset
No action No action
in (2) =10, 11, 12
,
13 Kiwa function
(low input pres
-
sure signal)
No action System in
stop status F4
No action System in
stop status
(1)
PR=0
Remote pres
-
sure sensor
disabled
No action No action No action No action
PR=1
Use of remote
pressure sensor
No action
Setpoint
on remote
sensor
No action Remote set
-
point ignored
(1)
The activation of the function relating to this box + any other function in
safety mode triggers a system stop. In this case, the system displays the
highest priority stoppage cause.
(2)
The numbers separated by commas indicate the possible setting values
for the function concerned
Instead, as regards the control unit, if there is a loss of communication it
lights relay 1 depending on the settings of O1 (see tab 20), considering the
lack of communication an error condition.
Tab.5 Triggering of safety mode