ENGLISH
GB
66
9. MAINTENANCE
Disconnect the power supply before starting any work on the sys
-
tem.
The system requires no routine maintenance operations.
However, below are the instructions for performing the special mainte
-
nance operations that may be necessary in particular cases (e.g. emptying
the system to put it away during a period of inactivity).
9.1 - Accessory tool
With the product, DAB supplies a metal key with a hexagonal section
(Fig.20 – 1) useful for performing some special maintenance operations on
the system, or during installation.
In particular, use the key for the orientation of the interface panel described
in par. 2.2.2 or for opening the door of the compartment next to the inter
-
face panel.
If the key is lost or damaged, the operation can be done using a standard
2mm allen wrench.
Figure 19
8.2 - Wall installation
This product is already set up for installation hanging on the wall with the
DAB accessory kit, to be purchased separately. The wall installation ap
-
pears as in Fig.19.
Figure 18
Содержание DAB E.SYBOX
Страница 1: ...INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE...
Страница 2: ...Manual valid for firmware versions 4 x 1 x...
