11. Install Trim Piece onto Da-Lift. See Figure 12.
May need to adjust position of Ceiling Tile
Holder to clear Trim.
10. Remove Ceiling Tile Holder Cap from Da-Lift. Install
Ceiling Tile cutout from step 6 into Ceiling Tile Holder
and assemble Ceiling Tile Holder Cap. See Figure 11.
12. Use provided Cable Ties for cable
management. See Figure 13. Allow enough
slack in the cords for projector movement. If
Da-Lift is a 220V version, use the supplied
electrical adapter.
Figure 11
TRIM
Figure 12
CEILING TILE
CEILING TILE
HOLDER CAP
Figure 13
CABLE TIE
HOLES
A
CABLE STORAGE