2. Remove Trim piece from Da-Lift. See Figure 4.
Save the fasteners.
3. Remove Universal Projector Mount from
Da-Lift. See Figure 5. Save the fasteners.
4. Secure Universal Projector Mount to projector.
See Figure 6. Thumbnuts can be used for fine-
tuning projector position in next step.
5. Secure the projector and mount to the Da-Lift. Use the features
shown to adjust the projector’s position. See Figure 3 and 7.
Projector lens should not protrude past all-thread centerline.
Figure 4
Figure 7
Figure 6
Figure 5
TRIM
UNIVERSAL
PROJECTOR MOUNT
THUMB NUT
NUTS FOR FORE AND
AFT ADJUSTMENT
PROJECTOR
NUTS FOR RIGHT TO
LEFT ADJUSTMENT
