10
The pattern will play back at the tempo of the host sequencer (if internal sync turned off –
Int.Sync.
) or at the tempo
which Drumazon’s
Tempo
function is set to (if using internal sync). This happens while a key is pressed and held.
This is a very creative mode which, by recording the notes into the host sequencer, can allow very complex percussion
structures to be created using patterns in Drumazon’s internal pattern memory.
It should be noted that in
Host mode
the
Start
,
Stop
and
Step buttons
on Drumazon’s don’t function. Patterns are only
played back while a key on a connected MIDI keyboard is pressed (and held).
In this mode, currently playing pattern is indicated by display unit:
In format:
[TONE NAME][– or #][OCTAVE NUMBER]
Midi output
Drumazon has permanently active MIDI output, which allows to control external instrument (virtual or hardware)
by Drumazon’s internal sequencer. It works either in
Native
or
Host mode
. Plug-in sends a midi note codes accordingly
to the current drum map configuration to its Midi output. Velocity values of Midi notes sent by Drumazon are
calculated on a basis of
Step attributes
(accented or non-accented) and value of
Global accent
.
When you set the Drumazon into
External
mode, it just passes MIDI notes through itself unchanged. So basically
the same notes you redirect into a plug-in you will get on the MIDI output.
Note: In this
mode the pattern
structure is
the same as it is
in Native Mode.
96 patterns
mapped to midi
keyboard as
notes: C-1 to B-7.
Pattern display and navigation
Play modes
•
Internal Pattern Storage
2
