D-MAX 600 TVL, Руководство пользователя

Страница: 18 / 48

16
9. DNR Control
It can remarkably reduce noise of minimum illumination by super
noise removable technique and also file size becomes smaller while
DVR is being recorded by the effective reduction of noise.
▶
Off, Low, Medium, Max
10. BACK LIGHT
This camera is designed so that it delivers a distinctive subject and
background at the same time, even when the subject is in backlight,
unlike conventional cameras, by adopting a proprietary DSP chip.
.Please select a suitable mode below them (The Set Back Light Mode
will be automatically changed by the selection)
▶ Off, WDR MODE, HLC MODE, BLC MODE
WDR : When there are both bright and dark areas at the same time,
this mode makes both areas distinctive.
BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly..
HLC(High Light Compensation) : If there is a high light installed in dark environment such as an apartment
parking garage or gas station entrance, removing the high light makes it possible to view car license plates
efficiently
OFF : Deactivates the BACKLIGHT function.
11. SET BACK LIGHT MODE
▶ WDR MODE
- Limit: Adjust the WDR Sensitivity by selecting Low or Max
- Level: Adjust the WDR Brightness by controlling 0~15.
▶
HLC(High Light Compensation)MODE
- Limit: Adjust the HLC Sensitivity by selecting Low, Medium or Max
- Level: Adjust the WDR Brightness by controlling 0~15.
- This Function only operate in nighttime.
▶
BLC MODE : Select BLC mode or BLC Set area mode by using
the joystick.
- BLC Level: Adjust the BLC Sensitivity by selecting Low, Medium or Max
- BLC Set AREA (Press F/F): Set BLC area location and size
- Select F/F button, and set the BLC area by using the joystick, and set are size by using Z/I, Z/O buttons.
(The monitor shows as Exit BLC set(Press F/N)
After complete all setup, press F/N button, and then move to RETURN MENU PAGE. It is automatically saved.
◄◄ CAMERA SETUP p1 ►►
1. ID Set : CAM-001
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : Max
5. Shutter speed. : AUTO
6. Sharpness level : 6
7. Brightness : 9
8. Flickerless : OFF
9. DNR Control : Medium
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
10. Back Light : WDR Mode
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : Off
15. DSS Control : 10 Field
16. Day&Night : Auto+Hi
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
10. Back Light : WDR Mode
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : Off
15. DSS Control : 10 Field
16. Day&Night : Auto+Hi
17. Stabilize On/Off : Off
- PREV MENU PAGE
- NEXT MENU PAGE