D-MAX 600 TVL, Руководство пользователя

Страница: 12 / 48

10
1). DIP SWITCH SETTING
Set the camera numbers in the state of
ADDR, set communication speed, protocol
in the state of INIT.
This part is each address of camera.
-Termination Resistor (DIP SW NO1)
-Turn the last camera on the data line as a switch
to turn on/off the terminal resistor on. Turn the
DIP SW of some of the farthest cameras on in the
case of the data lines distributed to
* The first
default is off.
-RS485RS422 SELECT (DIP SW NO2)
-Turn on or off for the suitable data system
between RS485 and RS422.
* The first default is off.
-Address /Initial select (DIP SW NO3)
-Set the DIP SW up in the ADDRESS.
*The first default is ADDRESS.
-Set the communication speed and Protocol
(Demand for the technical
inquiry) up in the
state of the INITAIL.
-Internal/External (DIP SW NO5)
-Use it when selecting Internal and external.
* The first default is INTERNAL
3. DIRECIONS FOR USE