manualshive.com logo in svg

D-Link xStack DGS-3612G series, Руководство CLI

Поделиться
Скачать
D-Link xStack DGS-3612G series Скачать руководство пользователя страница 64

xStack

®

 DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

 

61

download 

Parameters 

firmware_fromTFTP

 

−

 Download and install new firmware on the Switch from a TFTP 

server. 

•

 

<ipaddr> 

−

 The IP address of the TFTP server. 

•

 

<ipv6addr> 

–

 

The IPv6 address of the TFTP server. 

•

 

<path_filename 64>

 

−

 The DOS path and filename of the firmware file on the 

TFTP server. For example, C:\3612.had. 

•

 

unit <unitid1-12> 

–

 

Enter the ID of the Switch in the switch stack to where to 

save the file.  

•

 

all 

– Use this parameter to select all switches in the switch stack.  

•

 

<drive_id> 

– Enter the drive ID of the internal flash drive to where to save the 

file. 

•

 

{<pathname 64>} – 

The 

pathname 

in the command refers to the flash memory 

located on the switch. This drive is nominated c: and those who wish to save 
the firmware, instead of uploading it directly to the NV-RAM must specify the 
path on the flash memory to place this file (ex. c:/firm1). The filename cannot 
exceed 64 alphanumeric characters. 

•

 

boot_up –

 Enter this parameter to use this file as the boot up file upon next 

reboot of the switch. 

config_fromTFTP

 

−

 Download and install a configuration file on the Switch from a TFTP 

server. 

•

 

<ipaddr> 

−

 The IP address of the TFTP server. 

•

 

<ipv6addr> 

–

 

The IPv6 address of the TFTP server. 

•

 

<path_filename 64>

 

−

 The DOS path and filename of the switch configuration 

file on the TFTP server. For example, C:\3612.had. 

•

 

<drive_id> 

– Enter the drive ID of the internal flash drive to where to save the 

file. 

•

 

{<path_filename 64>} – 

The second

 path_filename 

in the command refers to 

the flash memory located on the switch. This drive is nominated c: and those 
who wish to save the firmware, instead of uploading it directly to the NV-RAM 
must specify the path on the flash memory to place this file (ex. c:/config1). 
The filename cannot exceed 64 alphanumeric characters. 

Restrictions 

Only Administrator-level users can issue this command.   

Example usage: 

 

To download a configuration file: 

DGS-3627:5#download cfg_fromTFTP 10.48.74.121 c:\cfg\setting.txt 

Command: download cfg _fromTFTP 10.48.74.121 c:\cfg\setting.txt 
 
Connecting to server................... Done. 
Download configuration................. Done. 
 
DGS-3627:5# 
DGS-3627:5##--------------------------------------------------------------------- 
DGS-3627:5##                     DGS-3627 Configuration 
DGS-3627:5## 
DGS-3627:5##                   Firmware: Build 2.50.B15 
DGS-3627:5##    Copyright(C) 2009 D-Link Corporation. All rights reserved. 
DGS-3627:5##--------------------------------------------------------------------- 
DGS-3627:5# 
DGS-3627:5# 
DGS-3627:5## BASIC 
DGS-3627:5# 
DGS-3627:5#config serial_port baud_rate 115200 auto_logout 10_minutes 
Command: config serial_port baud_rate 115200 auto_logout 10_minutes 

Содержание xStack DGS-3612G series














































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды