manualshive.com logo in svg

D-Link xStack DGS-3612G series, Руководство CLI

Поделиться
Скачать
D-Link xStack DGS-3612G series Скачать руководство пользователя страница 243

xStack

®

 DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

 

240

config 802.1x reauth  

Purpose 

Used to configure the 802.1X re-authentication feature of the Switch. 

Syntax 

config 802.1x reauth {port_based ports [<portlist> | all] | 
mac_based [ports] [<portlist> | all] {mac_address <macaddr>}] 

Description The 

config 802.1x reauth

 command is used to re-authenticate a 

previously authenticated device based on port number or MAC address.

Parameters 

port_based 

– This instructs the Switch to re-authorize 802.1X functions 

based only on the port number. Ports approved for re-authorization can 
then be specified. 

mac_based

 

−

 This instructs the Switch to re-authorize 802.1X functions 

based only on the MAC address. MAC addresses approved for re-
authorization can then be specified. 

ports <portlist> 

−

 Specifies a port or range of ports to be re-authorized. 

The beginning and end of the port list range are separated by a dash. 
Non-contiguous portlist entries are separated by a comma. (ex:1-3,7-9) 

all

 

−

 Specifies all of the ports on the Switch. 

mac_address <macaddr>

 

−

 Enter the MAC address to be re-authorized.

Restrictions 

Only Administrator and Operator-level users can issue this command. 

Example usage: 

To configure 802.1X reauthentication for ports 1 to 11:

 

DGS-3627:5#config 802.1x reauth port_based ports 1-11 

Command: config 802.1x reauth port_based ports 1-11 

 

Success. 

 

DGS-3627:5# 

 

config radius add 

Purpose 

Used to configure the settings the Switch will use to communicate with a 
RADIUS server. 

Syntax 

config radius add <server_index 1-3> <server_ip> key <passwd 32> 
[default | {auth_port <udp_port_number 1-65535> | acct_port 
<udp_port_number 1-65535>}] 

Description The 

config radius add

 command is used to configure the settings the 

Switch will use to communicate with a RADIUS server. 

Parameters 

<server_index 1-3> 

−

 Assigns a number to the current set of RADIUS 

server settings. Up to three groups of RADIUS server settings can be 
entered on the Switch.  

<server_ip>

 

−

 The IP address of the RADIUS server. 

key 

−

 Specifies that a password and encryption key will be used between 

the Switch and the RADIUS server. 

•

 

<passwd 32> 

−

 The shared-secret key used by the RADIUS 

server and the Switch. Up to 32 characters can be used. 

default

 

−

 Uses the default udp port number in both the “auth_port” and 

“acct_port” settings. 

auth_port <udp_port_number 1-65535> 

−

 The UDP port number for 

authentication requests. The default is 

1812

. 

acct_port <udp_port_number 1-65535>

 

−

 The UDP port number for 

accounting requests. The default is 

1813

. 

Содержание xStack DGS-3612G series














































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды