xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
139
DGS-3627:5#config double_vlan Drazen delete 1:4-1:8
Command: config double_vlan Drazen delete 1:4-1:8
Success.
DGS-3627:5#
show double_vlan
Purpose
Used to display the Double VLAN settings on the Switch.
Syntax
show double_vlan {<vlan_name>}
Description
This command will display the current double VLAN parameters
configured on the Switch.
Parameters
vlan_name
−
Enter the name of a previously created VLAN for which
to display the settings.
Restrictions None.
Example usage:
To display parameters for the Double VLAN “RG”:
DGS-3627:5#show double_vlan RG
Command: show double_vlan RG
Global Double VLAN : Enabled
====================================================
SPVID : 2
VLAN Name : RG
TPID : 0x9100
Uplink Ports :
Access Ports : 1:4-1:8
Unknow Ports :
----------------------------------------------------
Total Entries : 1
DGS-3627:5#
enable pvid auto_assign
Purpose
Used to enable auto assignment of PVID.
Syntax
enable pvid auto_assign
Description
If “Auto-assign PVID” is enabled, PVID will be possibly changed
by PVID or VLAN configuration. When a user configures a port to
VLAN
X
’s untagged membership, this port’s PVID will be updated
with VLAN X. In the form of VLAN list command, PVID is updated
with the last item of the VLAN list. When a user removes a port
from the untagged membership of the PVID’s VLAN, the port’s
PVID will be assigned with “default VLAN”. The default setting is
enabled.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this
command.
Example usage:
To enable the auto-assign PVID:
