xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
135
Example usage:
To display the Switch’s current VLAN settings:
DGS-3627:5#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1:1-1:25
Static Ports : 1:1-1:25
Current Tagged Ports :
Current Untagged Ports: 1:1-1:25
Static Tagged Ports :
Static Untagged Ports : 1:1-1:25
Forbidden Ports :
VID : 4094 VLAN Name : v1
VLAN Type : Static Advertisement : Disabled
Member Ports : 1:4,1:8
Static Ports : 1:4,1:8
Current Tagged Ports : 1:4,1:8
Current Untagged Ports:
Static Tagged Ports : 1:4,1:8
Static Untagged Ports :
Forbidden Ports :
Total Entries: 2
DGS-3627:5#
show gvrp
Purpose
Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>}
Description
This command displays the GVRP status for a port list on the
Switch.
Parameters
<portlist>
−
Specifies a range of ports for which the GVRP status
is to be displayed. The beginning and end of the port list range
are separated by a dash. Non-contiguous portlist entries are
separated by a comma. (ex: 1-3,7-9)
Restrictions None.
Example usage:
To display GVRP port status:
