D-Link xStack DGS-3427, Руководство по эксплуатации продукта

Страница: 93 / 424

xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Sw itch
84
Port List Specify the ports that will enable or disable the filter DHCP server. Tick the All Ports check box to
select all ports.
Filter DHCP Server Port Settings
Action Select Add or Delete to add or delete a filter DHCP server entry.
Server IP
Address The IP address of the DHCP server that specifies an allotted server IP address to the client.
Client MAC
Address Specify the MAC address of the client which allowed the requested IP address from the DHCP
server.
Port List Enter the list of ports to use the given filter DHCP server entry. Tick the All Ports check box to
select all ports.
Click Apply to implement the changes.
Layer 2 Protocol Tunneling Settings
The Layer 2 Protocol Tunneling (L2PT) supports traffic of multiple customers across service provider networks. L2PT enables the
BPDU’s of the same customer’s network to be multicast over specific VLANs in the service provider’s network, which in turn
will ensure the same geographically dispersed customer network can implement consistent spanning tree calculations across the
service provider network.
To view this window, click Administration > Layer 2 Protocol Tunneling Settings , as shown below.
Figure 2 - 97 Layer 2 Protocol Tunneling Settings window
The following fields can be configured:
Parameter Description
Layer 2 Protocol
Tunneling State Use the drop-down menu to choose Enabled or Disabled .
Unit Select the unit to configure.