manualshive.com logo in svg

D-Link xStack DGS-3426, Руководство пользователя

Скачайте бесплатное руководство по пользователю CLI для D-Link xStack DGS-3426 на нашем сайте. Этот мануал обеспечит вас всеми необходимыми инструкциями для эффективного использования продукта. Посетите наш вебсайт, чтобы загрузить его сейчас.

Поделиться
Скачать
background image

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

37 

     

ICMPv6 

Network professionals are already very familiar with ICMP for IPv4, which is an essential tool in the IPv4 network, relaying 
messages about network problems and the general condition of the network. ICMPv6 is the successor to the IPv4 version and 
performs many of the same basic functions as its precursor, yet is not compatible with ICMPv4. ICMPv6 has made improvements 
over its forerunner, with such enhancements as managing multicast group memberships and allowing for neighbor discovery by 
resolving link-layer addresses attached to the same link and identifying changes in those addresses. ICMP can also discover 
routers, determine which neighbors can be reached and map IP addresses to MAC addresses within the network. ICMPv6 is a vital 
part of the IPv6 network and must be implemented on every IPv6 node for operations to function normally. 

Two kinds of ICMP messages are apparent on the IPv6 network: 

Error Messages 

– ICMP error messages are sent out on the network when packet sizes exceed the path MTU (Maximum Transfer 

Unit), when the hop count of the IPv6 packet has been surpassed, when messages cannot reach their intended destination and 
when there are parameter problems within the IPv6 packet. 

Informational Messages –

 ICMP informational messages send out packets describing current network information valuable to 

devices on the network. A common and useful ICMPv6 informational message is the ping program use to discover the availability 
a device, by using a ping request and reply format. Other informational messages include Path MTU discovery, which is used to 
determine the maximum size of data packets that can be allowed to be transferred, and Neighbor Discovery messages, which 
discover routers that can forward packets on the network. Neighbor discovery will be discussed further in the next section. 

Neighbor Discovery 

Neighbor discovery is a new feature incorporated in IPv6. In IPv4, no means were available to tell if a neighbor could be reached. 
Now, combining ICMP messages and ARP, neighbors can be detected and their layer 2 addresses (MAC Address) can be 
identified. This feature can also discover neighboring routers that can forward packets and keep track of the reachability of routers, 
as well as if changes occur within link-layer addresses of nodes on the network or identical unicast addresses are present on the 
local link. 

The functionality of the Neighbor Discovery feature is based on ICMPv6 packets, Neighbor Solicitation and Router 
Advertisement messages circulating on the network. When a node wishes to determine link layer addresses of other nodes on the 
same link, it produces a Neighbor Solicitation message to be circulated on the local link. When received by a neighbor, this 
neighbor will produce Router Advertisements immediately to be returned. These Router Advertisements will contain a multicast 
address as the destination address and have an ICMP type of 134 (the specified number for Router Advertisements), as well as 
having the link-layer address of the node sending the advertisement. Router Advertisement messages may be periodic, specified in 
the advertisement by having the all-nodes multicast address FF02::1, or sent out as a result of receiving a Neighbor Solicitation 
message, specified in the advertisement by having the address of the interface that first sent the solicitation message. Once 
confirmation of the Neighbor has been reached, packets can now be exchanged on the link. 

Neighbor Unreachability Detection 

At times on the network, problems occur in reaching the Neighbor node or getting a response from the Neighbor. A neighbor is 
considered reachable when it has received and processed packets sent to it, and in return sends a packet back notifying a 
affirmative response. This response may come in the form of an indication from an upper-layer protocol, like TCP, noting that 
progress is being made, or in response from a Neighbor Solicitation message in the form of a Router Advertisement message. If 
responses are not received from the node, it is considered unreachable and a Destination Unreachable message is received in the 
form of an ICMP packet. This Destination Unreachable ICMP packet will contain the reason for the fault, located in the code field 
of the ICMP header. Five possible reasons for the failure can be stated: 

1.

 

There is no route or destination (Code 0). 

2.

 

Communication has been administratively prohibited, such as a firewall or filter (Code 1) 

3.

 

Beyond the scope of the source address, when the multicast scope of the source address is smaller than the scope of the 
destination address (Code 2) 

4.

 

The address is unreachable (Code 3) 

5.

 

The port is unreachable (Code 4) 

Содержание xStack DGS-3426





































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3426

D-Link SmartPro DGS-1500-20 Reference Manual preview
SmartPro DGS-1500-20
Бренд: D-Link Страницы: 113
D-Link xStack DGS-3120 Series Cli Reference Manual preview
xStack DGS-3120 Series
Бренд: D-Link Страницы: 1150
3Com SUPERSTACK 3 3226 Datasheet preview
SUPERSTACK 3 3226
Бренд: 3Com Страницы: 5
3Com LANPLEX 2500 Operation Manual preview
LANPLEX 2500
Бренд: 3Com Страницы: 139
3Com CoreBuilder 7000 Installation & Start?Up Manual preview
CoreBuilder 7000
Бренд: 3Com Страницы: 150
3Com CoreBuilder 7000 Operation Manual preview
CoreBuilder 7000
Бренд: 3Com Страницы: 264
3Com 4007 Command Reference Manual preview
4007
Бренд: 3Com Страницы: 574
3Com 3CRUS2475 24 User Manual preview
3CRUS2475 24
Бренд: 3Com Страницы: 333
3Com SUPERSTACK 3 3226 Getting Started Manual preview
SUPERSTACK 3 3226
Бренд: 3Com Страницы: 70
3Com OfficeConnect 3C16790C User Manual preview
OfficeConnect 3C16790C
Бренд: 3Com Страницы: 18
3Com 5500-EI PWR Reference Manual preview
5500-EI PWR
Бренд: 3Com Страницы: 1314
3Com SuperStack II Switch 1100 User Manual preview
SuperStack II Switch 1100
Бренд: 3Com Страницы: 62
Raritan MCCAT18 Specifications preview
MCCAT18
Бренд: Raritan Страницы: 4
Ruby Tech GS-5124C Technical Specifications preview
GS-5124C
Бренд: Ruby Tech Страницы: 2
Conrad 97 49 89 Operating Instructions Manual preview
97 49 89
Бренд: Conrad Страницы: 8
Quintech RFS 0702 Operation And Adjustment Procedure preview
RFS 0702
Бренд: Quintech Страницы: 2
N-Tron 302MC-XX Installation Manual preview
302MC-XX
Бренд: N-Tron Страницы: 16
Alloy AMS-10T2SFP Quick Install Manual preview
AMS-10T2SFP
Бренд: Alloy Страницы: 33

Бренды по названию

Популярные бренды

Загрузить еще бренды