D-Link xStack DGS-3426, Руководство пользователя

Страница: 273 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 11- 13. Rx Error Analysis window (table)
The following fields can be set:
Parameter Description
Time Interval [1s] Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Record Number [200]
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Crc Error
Counts otherwise valid packets that did not end on a byte (octet) boundary.
UnderSize The number of packets detected that are less than the minimum permitted packets size of 64
bytes and have a good CRC. Undersize packets usually indicate collision fragments, a nor-
mal network occurrence.
OverSize Counts valid packets received that were longer than 1518 octets and less than the
MAX_PKT_LEN. Internally, MAX_PKT_LEN is equal to 1536.
Fragment The number of packets less than 64 bytes with either bad framing or an invalid CRC. These
are normally the result of collisions.
Jabber Counts invalid packets received that were longer than 1518 octets and less than the
MAX_PKT_LEN. Internally, MAX_PKT_LEN is equal to 1536.
Drop The number of packets that are dropped by this port since the last Switch reboot.
Symbol Counts the number of packets received that have errors received in the symbol on the
physical labor.
Show/Hide Check whether or not to display CRC Error, Under Size, Over Size, Fragment, Jabber, and
Drop errors.
Clear Clicking this button clears all statistics counters on this window.
259