D-Link xStack DGS-3426 страница 161 Скачать руководство пользователя

Страница: 161 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch

Figure 7- 34. Router Port- modify window

The following parameters can be set:

Parameter Description

VID (VLAN ID)

This is the VLAN ID that, along with the VLAN Name, identifies the VLAN where the MLD
multicast router is attached.

VLAN Name

This is the name of the VLAN where the MLD multicast router is attached.

Unit

Select the switch in the switch stack to be modified.

Member Ports

Ports on the Switch that will have a multicast router attached to them. There are four options for
which to configure these ports:

None

– Click this option to not set these ports as router ports

Static

– Click this option to designate a range of ports as being connected to a multicast-enabled

router. This command will ensure that all packets with this router as its destination will reach the
multicast-enabled router.

Forbidden

– Click this option to designate a port or range of ports as being forbidden from being

connected to multicast enabled routers. This ensures that these configured forbidden ports will
not send out routing packets

Both –

Click

this option to designate a port or range of ports as being both forbidden from being

connected to multicast enabled routers. This ensures that these configured forbidden ports will
not send out routing packets.

Click

Apply

to implement the new settings.

147

Содержание xStack DGS-3426





































































































































































































































































































































































Результаты поиска

Содержание xStack DGS-3426

Отзывы:

Похожие инструкции для xStack DGS-3426

Бренды по названию

Популярные бренды

D-Link xStack DGS-3426, Руководство пользователя

Результаты поиска

Содержание xStack DGS-3426

Отзывы:

Похожие инструкции для xStack DGS-3426

Бренды по названию

Популярные бренды