DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 133. The page for adding a virtual server.
You can specify the following parameters:
Parameter
Description
Template
Select a virtual server template from the drop-down list, or select
Custom
to specify all parameters of the new virtual server
manually.
Name
A name for the virtual server for easier identification. You can
specify any name.
Interface
A WAN connection to which this virtual server will be assigned.
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Public port (begin)/
Public port (end)
A port of the router from which traffic is directed to the IP address
specified in the
Private IP
field. Specify the start and the end value
for the port range. If you need to specify one port, enter the needed
value in the
Public port (begin)
field and leave the
Public port
(end)
field blank.
Private port (begin)/
Private port (end)
A port of the IP address specified in the
Private IP
field to which
traffic is directed from the
Public port
. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the
Private port (begin)
field and leave the
Private port (end)
field blank.
Page
164
of 202
