D-Link SmartPro DGS-1500-20, Руководство пользователя

Страница: 86 / 93

6 Command Line Interface
D-Link Web Smart Switch User Manual
8 8 1 1
logout
Purpose To log out a user from the Switch’s console.
Syntax logout
Description The
logout
command terminates the current user’s session on
the Switch’s console.
Parameters None.
Restrictions None.
Example usage:
To terminate the current user’s console session:
DGS-1500-28> logout
NOTE: Save your configuration changes before
logging out.
ping
Purpose To test the connectivity between network devices.
Syntax <ipaddr>
Description
The
ping
command checks if another IP address is reachable on
the network. You can ping the IP address connected to through
the managed VLAN (VLAN 1 by default), as long as there is a
physical path between the switch and the target IP equipment. By
default, Switch sends five pings to the target IP.
Parameters <ipaddr> - The IP address of the host.
Restrictions None.
Example usage:
To ping the IP address 10.90.90.91:
DGS-1500-28> ping 10.90.90.91
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
--- 10.90.90.91 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DGS-1500-28>
reboot
Purpose To reboot the Switch. If the Switch is a member of a stack, it may
be rebooted individually, without affecting the other members of
the stack.
Syntax reboot