5 Configuration
D-Link Web Smart Switch User Manual
6
6
1
1
Figure 5.79 – Security > SSL Settings
NOTE:
When SSL is enabled, it will take longer
time to open a web page due to encryption. After
saving configuration, please wait around 10
seconds for the system summery page.
AAA > RADIUS Server
The Authentication RADIUS server page allows user to facilitate centralized user administration as well as
providing protection against a sniffing, active hacker.
Figure 5.80 – AAA > RADIUS Server
Index:
Choose the desired RADIUS server to configure: 1, 2 or 3.
IP Address:
Set the RADIUS server IP.
Authentication Port (1 - 65535):
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port (1 - 65535):
Set the RADIUS account server(s) UDP port. The default port is 1813.
Timeout (1 – 255 sec):
This field will set the time the Switch will wait for a response of authentication from
the user. The user may set a time between
1
and
255
seconds. The default setting is
5
seconds.
Retransmit (1 – 255 times):
This command will configure the maximum number of times the Switch will
accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be
denied access to the Switch and will be locked out of further authentication attempts. Command line
interface users will have to wait 60 seconds before another authentication attempt. Telnet and web users will
be disconnected from the Switch. The user may set the number of attempts from
1
to
255
. The default
setting is
2
.
Key:
Set the key the same as that of the RADIUS server.
Confirm Key:
Confirm the shared key is the same as that of the RADIUS server.
Click
Apply
to implement configuration changes.
Содержание SmartPro DGS-1500-20
Страница 1: ......
Страница 29: ...5 Configuration D Link Web Smart Switch User Manual 24 Figure 5 15 User Guide Micro Site ...
Страница 93: ......
