D-Link SmartPro DGS-1500-20, Руководство пользователя

Страница: 58 / 93

5 Configuration
D-Link Web Smart Switch User Manual
5 5 3 3
RxPortTLVsDiscarded – Each LLDP frame can contain multiple pieces of information, known as
TLVs. If a TLV is malformed, it is counted and discarded.
RxPortTLVsUnrecognized – Displays the number of well-formed TLVs, but with an known type
value.
RxPort Ageouts – Each LLDP frame contains information about how long time the LLDP information
is valid. If no new LLDP frame is received within the age out time, the LLDP information is removed,
and the Age-Out counter is incremented.
L3 Functions > IP Interface
The IP Interface page provides user to configure the IP Interface settings.
Figure 5.63 – L3 Functions > IP Interface
Interface Name: Specifies the name of IP interface.
VLAN Name: Specifies the VLAN name of IP interface.
IP Address: Specifies the IP address for the interface.
Netmask: Select the netmask of IP address.
Interface Admin State: Enables or disables the interface administration state.
Click Add for the settings to take effect.
L3 Functions > Static Route
The Static Route page provides user to configure the Static Route settings.
Figure 5.64 – L3 Functions > Static Route
IP Address: Specifies the IP address of the Static Route.
Netmask: Specifies the Netmask of the IP address entered into the Static Route table.
Gateway: Specifies the corresponding Gateway of the IP address entered into the Static Route table.
Metric (1-65535): Represents the metric value of the IP interface entered into the table. This field may read
a number between 1-65535 for an OSPF setting, and 1-16 for a RIP setting.
Backup State: The user may choose between Primary and Backup. If the Primary Static Route fails,
the Backup Route will support the entry. Please take note that the Primary and Backup entries cannot have
the same Gateway.
Click Add for the settings to take effect.