DIR-825
AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Connecting Subordinate Devices via Web-based Interface
To connect a subordinate device with the
ESTABLISH CONNECTION
button in the web-based
interface, follow the next steps:
1. Simultaneously press the
ESTABLISH CONNECTION
button in the web-based interface
the main and the subordinate device (or two subordinate devices, if one of them has
previously been connected to the mesh network).
!
Do not press the
button on more than two devices simultaneously.
2. The
WLAN 2.4G
and
WLAN 5G
LEDs should start blinking one at a time. Wait for about
4 minutes for the subordinate device to receive all mesh network settings from the main
device, including SSID and password.
3. Make sure the connection is successful. To do this, in the web-based interface of the main
device, on the
Functions / Wi-Fi / EasyMesh
page, in the
Network topology
section,
check the information on the connected devices.
To view detailed data on a mesh network device, click the line corresponding to this device in the
Network topology
section.
Figure 145. The device information page.
Page
181
of 244
