63
1st FTP password-
Specify the password to access the external FTP
server (ex. 12345).
1st FTP remote folder-
Specify the destination folder in the external FTP
server (ex. snapshot).
Primary FTP passive
mode-
Passive mode will allow access to an external
FTP server if your camera is behind a router
protected by a firewall.
2nd FTP server-
Specify the Domain name or IP address of your
second external FTP server. This field is optional
if you have already filled in the information for the
first FTP server.
2nd FTP user name-
Specify the user name to access your backup
FTP server.
2nd FTP password-
Specify the user password to your backup FTP
server.
2nd FTP remote folder-
Specify the destination folder on your external
backup FTP server.
For detailed information about each setting, please refer to
Configuration >
Advanced > Mail & FTP
in the section titled “Using the DCS-2100+ With an
Internet Browser” (page 41). Click the apply button when finished.
Secondary FTP passive
mode-
Passive mode will allow access to a second
external FTP server if your camera is behind a
router protected by a firewall.
1st FTP user name-
Specify the user name to access the external FTP
server (ex. John Smith).
3
4
5
6
Record Snapshots to your FTP server with
Motion Detection (continued)
Содержание SECURICAM Network DCS-2100+
Страница 25: ...25 The installation is complete Click Finish Installing IP surveillance Software continued Click Next ...
Страница 138: ...138 Time Zone Table GMT stands for Greenwich Mean Time which is the global time that all time zones are measured from ...
Страница 139: ...139 Time Zone Table continued ...
Страница 143: ...143 Register online your D Link product at http support dlink com register 10 04 04 Registration ...