D-Link RPS DPS-200, Быстрое руководство по установке

Страница: 11 / 16

Connecting a single RPS in a DPS-800 rack to a switch
Connecting a single RPS in a DPS-900 rack to a switch
Connecting a DPS-600 to a switch
Using a standard AC power cable, connect the redundant
power supply to the main AC power source. A green LED
on the front of the DPS-200/DPS-300/DPS-500/DPS-600
will glow to indicate a successful connection.
Connecting DC Power (DPS-500DC)
1. Firmly attach the DC power source to the negative and
positive contacts on the wiring assembly.
•
The negative pole (-)
connects to the
-48V
contact.
•
The positive pole (+)
connects to the
-48V
Re contact.
•
If available, an earth
ground may be
connected to the center
contact post.
2. Tighten the contact screws to secure the connection.
No change in switch configuration is necessary when
connecting to the RPS.