D-Link DXS-3410 Series, Руководство по установке оборудования

Страница: 18 / 54

DXS-3410 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
13
A green LED on the front panel of the RPS unit will illuminate, indicating a successful connection. Reattach the AC
power cord to the AC power port of the Switch. The RPS LED indicator on the front panel of the Switch will confirm the
presence and operation of the RPS. No software configuration is necessary.
CAUTION: Leave at least 15 cm (6 inches) of space at the rear of the Switch when an RPS is installed
to prevent cable damage.
ATTENTION:
Laissez un espace d’au moins 15 cm (6 pouces) à l'arrière du commutateur lorsqu'un RPS
est installé pour éviter d'endommager les câbles.
Always keep the RPS port cover installed when there is no RPS connected to the Switch.
Figure 3-12 Reinstalling the RPS port cover (when no RPS is connected)