D-Link DXS-1210 Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 119

background image

2 Hardware Installation

D-Link DXS-1210 Series User Manual

6

•

Install the power supply before connecting the power cable to the power supply.

•

Unplug the power cable before removing the power supply.

•

If the system has multiple sources of power, disconnect power from the system by
unplugging all power cables from the power supplies.

•

Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system.
Avoid sudden stops and uneven surfaces.

Step 1: Unpacking

Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the
User Manual to make sure all items are present and undamaged. If any item is missing or damaged, please
contact your local D-Link reseller for replacement.

One D-Link DXS-1210 Series switch

One Multilingual Getting Started Guide

User Guide CD with DNA (D-Link Network Assistant) Program

Power Cord and Power Cord Retainer

Rack-mount kit and Rubber Feet

If any item is found missing or damaged, please contact the local reseller for replacement.

Step 2: Switch Installation

For safe switch installation and operation, it is recommended that you:

Visually inspect the power cord to see that it is secured fully to the AC power connector.

Make sure that there is proper heat dissipation and adequate ventilation around the switch.

Do not place heavy objects on the switch.

Desktop or Shelf Installation

When installing the switch on a desktop or shelf, the rubber feet included with the device must be attached
on the bottom at each corner of the device’s base. Allow enough ventilation space between the device and
the objects around it.

Figure 2.1 – Attach the adhesive rubber pads to the bottom

Rack Installation

The switch can be mounted in an EIA standard size 19-inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets to the switch’s side panels (one on each side) and
secure them with the screws provided (with 8 M3*6.0 size screws).

Figure 2.2 – Attach the mounting brackets to the Switch

Then, use the screws provided with the equipment rack to mount the switch in the rack.

«
...
10
11
12
13
14
...
»

Содержание DXS-1210 Series
























































































































Отзывы:

Нет отзывов

Похожие инструкции для DXS-1210 Series

Univerge SV8100

Бренд: NEC Страницы: 44

Бренд: Linksys Страницы: 2

Бренд: Garland Страницы: 4

Бренд: SAF Страницы: 30

Бренд: dixell Страницы: 4

AirStation WHR-G300N

Бренд: Hornington Страницы: 6

StorTrends 1312-P

Бренд: American Megatrends Страницы: 2

Speed Touch 591s

Бренд: Alcatel Страницы: 184

Бренд: Patton electronics Страницы: 2

Бренд: Lanner Страницы: 78

Бренд: Conel Страницы: 32

Бренд: Juniper Страницы: 420

Бренд: Handicare Страницы: 60

Бренд: Zalip Страницы: 76

Бренд: ATTO Technology Страницы: 2

Wisenet PRN-6400DB4

Бренд: Hanwha Techwin Страницы: 125

Бренд: PairGain Страницы: 48

Wisenet XRN-6410DB4

Бренд: Hanwha Techwin Страницы: 118

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды