D-Link DXS-1210 Series, Руководство пользователя

Страница: 108 / 119

5 Command Line Interface
D-Link DXS-1210 Series User Manual
102
save {startup-config | config-1 |
config-2}
Save configuration.
boot image [image-1 | image-2] Select the boot up image.
debug info Displays Debug Table.
debug show tech-support Displays technical support information.
Each command is listed in detail, as follows:
?
Purpose To display a list of commands.
Syntax ?
Description The ? command displays a list of commands of the switch.
Parameters None.
Restrictions None.
Example usage:
To display a list of commands of the switch:
DXS-1210-12TC> ?
USEREXEC commands :
config ipif <short <1-4094>> { ipaddress <ip_addr> <ip_mask> | dhcp | bootp }
config ipif <short <1-4094>> {ipv6address <ip6_addr> <short <1-128> |
dhcpv6_client <enable | disable>}
debug info
logout
ping [<ipv4_addr> | <ipv6_addr>] [size <value <1-60000>>] [timeout <time_out
<1-100>>] [repeat <time>]
reboot
reset config
save
show ipif [INTERFACE-ID]
show switch
DXS-1210-12TC>
config ipif
Purpose To configure the System IP interface.
Syntax config ipif <short <1-4094>> { ipaddress <ip_addr>
<ip_mask> | dhcp }
config ipif <short <1-4094>> {ipv6address <ip6_addr> <short
<1-128> | dhcpv6_client <enable | disable>}
Description The config ipif system command configures the System IP
interface on the Switch.
Parameters short <1-4094>
− Specifies the name of ipif setting.
ipaddress <ip-addr> <ip_mask>
− The IP address and subnet
mask to be created. Users need to specify the address and mask