D-Link DXS-1210-10TS, Справочное руководство

Страница: 63 / 394

DXS-1210 Series Smart Managed Switch CLI Reference Guide
60
Usage Guideline
The user account configuration information is stored in the running configuration file and can be
applied to the system later. If the service password-encryption command is enabled, the password
will be stored in the encrypted form.
When the service password encryption option is disabled and the password is specified in the plain
text form, the password will be in plain text form. However, if the password is specified in the
encrypted form or if the password has been converted to the encrypted form by the last enable
password encryptionoption, the password will still be in the encrypted form. It cannot be reverted back
to plain text.
The password affected by this command includes the user account password, enable password, and
the authentication password.
Example
This example shows how to enable the encryption SHA-1 of the password before stored in the
configuration file.
Switch# configure terminal
Switch(config)# service password encryption 7
Switch(config)#
5-11 show terminal
This command is used to obtain information about the terminal configuration parameter settings for
the current terminal line.Use this command in any EXEC mode or any configuration mode.
show terminal
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the terminal configuration parameters for the current
terminal line.
Example
This example shows how to display information about the terminal configuration parameter settings
for the current terminal line.