D-Link DWS-3160-24TC, Руководство по установке оборудования

Страница: 27 / 67

DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
19
Boot Procedure V1.00.001
-------------------------------------------------------------------------------
Power On Self Test ........................................ 100 %
MAC Address : 00-11-22-33-45-67
H/W Version : A1
Please Wait, Loading V1.00.037 Runtime Image .............. 100 %
UART init ................................................. 100 %
Starting runtime image
Device Discovery .......................................... 100 %
Configuration init ........................................ 100 %
Figure 4- 3. Boot up display in console screen
After the boot sequence has been completed, the console login screen will be displayed.
Connecting to the Switch for the first time
The Switch supports user-based security that can allow prevention of unauthorized users from accessing the Switch
or changing its settings. This section will explain how to log into the Switch’s Command Line Interface via the out-of-
band console connection.
Upon initial connection to the Switch, the login screen appears (see example below).
DWS-3160-24PC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.037
Copyright(C) 2011 D-Link Corporation. All rights reserved.
UserName:
PassWord:
DWS-3160-24PC:admin#
Figure 4- 4. The Switch’s Login Screen
By default, there is no
Username
and
Password
configured in the account settings of this Switch. This will allow the
user to simply connect to this Switch for the first time by pressing the ‘
Enter
’ key twice.
After press
Enter
for both the Username and Password fields, access will be given to enter commands after the
command prompt (
DWS-3160-24PC:admin#
) appears.
NOTE:
The first user automatically gets Administrator level privileges. At least one Admin-level user
account must be created for the Switch.