D-Link DWS-3160-24TC, Руководство по установке оборудования

Страница: 18 / 67

DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
10
Figure 2- 5. Connecting the DWS-3160-24TC to the DPS-200
To connect the DPS-200 to the Switch for the first time, follow these steps:
1. Disconnect the power cable from the power connector of the Switch.
2. Interlink the RPS ports of the Switch and the DPS-200 by using the
14-pin
DC power cable, supplied with the
RPS.
3. Interlink the Power connector, of the DPS-200, and the grounded electrical outlet by using a standard AC
power cable. A green LED on the front of the DPS-200 will illuminate to indicate a successful connection.
4. Reconnect the power cable to the power connector of the Switch.
5. No software configuration is needed for this installation.
CAUTION:
Do NOT use the DWS-3160-24TC Switch with any Redundant Power System other
than the DPS-200.
Redundant Power Supply, the DPS-700
The D-Link,
DPS-700
, External Redundant Power Supply, provides a backup power solution to the
DWS-3160-24PC
Switch in the event that the Internal Power Supply fails. The DPS-700 is a standalone, low-cost, simple solution that
can prevent the Switch from shutting down when the Internal Power Supply fails. This option is imperative when the
availability of this Switch on the network is of high importance.