D-Link DWS-1008, Руководство по установке

Страница: 4 / 16

4 D-Link Systems, Inc.
DWS-1008 Install Guide Installation Overview
Serial Console Cable
The serial console port has a female DB-9 connector and supports the
EIA-232D signaling standard. You need a standard DB-9-male-to-DB-9-female
PC modem cable.
Serial Console Pin Signals
Switch Pin Usage PC Pin Usage
2 Receive 3 Transmit
3 Transmit 2 Receive
5 Ground 5 Ground
10/100 Ethernet Cable Wiring
Connections on the 10/100 ports require CAT5 cable based on the
EIA/TIA-586 standard. The 10/100 Ethernet ports on the DWS-1008 switch
provide automatic MDI/MDX, which automatically crosses over the send and
receive signals if required.
The table below lists the pin signals for 10/100 Ethernet straight-through wiring.
Pins 4, 5, 7, and 8 are used only when Power over Ethernet (PoE) is enabled
on the port. RD means Receive Data and TD means Transmit Data.
DWS Switch Other Device
Pin Function Pin Function
1 RD+ 1 TD+
2 RD- 2 TD-
3 TD+ 3 RD+
4 PoE+ 4 PoE+
5 PoE+ 5 PoE+
6 TD- 6 RD-
7 PoE- 7 PoE-
8 PoE- 8 PoE-
Installation Overview