11
D-Link DWR-933 User Manual
Section 2 - Installation
Connect a Wireless Client to your DWR-933 Using WPS
Step 2
-
Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters,
media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to
connect to the DWR-933 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to
enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the DWR-933 for about 3 seconds. The message “WPS Pairing” will appear. To cancel the WPS pairing process,
holding the WPS button for 3 seconds. The message “WPS Aborted” will appear.
Step 3
-
Allow up to 1 minute for your connection to be configured. If successful, the number above the 2.4 GHz icon will increment by one. The
message “WPS Fail” appears if the device was unable to find a wireless client to connect to. If multiple attempts are unsuccessful, we
suggest trying to connect by manually inputting the SSID and password.
MYOPERATOR
Charging Complete
WPS Pairing
WPS Aborted
SSID1:mySSID
KEY1:aaaabbcc
SSID2:mySSID
KEY2:bbbbccdd
Web IP:192.168.0.1
Usage: 105KB
MYOPERATOR
1