DWR-500 Quick Installation Guide
14
Step 4
After confirming the setup as seen in
Figure 31, the router will reboot and start
functioning as a portal node.
Figure 31. Reboot and Portal Node Setup Complete.
Example Configuration 2: Point node
Step 1
Select the country where DWR-500 will
be installed. Based on Figure 26 and
Table 7, point node is assigned as 2.
Finally, select the role of this node as
Point. See Figure 32.
Figure 32. Step 1 Setting up a Point Node.
Step 2
Shown in Figure 33, enter the Router
ID, IP Address/Mask as per the Table
7.
Figure 33. Step 2 Setting up router details for Point Node.
