D-Link DWC-2000, Справочное руководство CLI

Страница: 64 / 113

62
configured servers.
4.11 system remote_management https configure
S.No Command Name Description Type and Description
1 save
Save access Management
changes for https.
2 exit
Save access Management
changes for https and exit
current mode.
3 cancel
Roll back Remote Mgmt
changes.
4 enable
Enable/disable remote mgmt
over https.
Boolean choice
5 type
Enable/disable remote mgmt
over https.
Unsigned integer
6 from_address
Set the starting IP in case of
range, and the IP to be allowed
access in case of granting
access to a particular machine
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-
255
7 end_address
Set the Ending IP in case of
range.
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-
255
8 port
Set the port you want to use for
HTTP.
Unsigned integer
9 enable_remote_snmp Enable/disable remote snmp.
Boolean choice
4.12 system remote_management telnet configure
S.No
Command
Name
Description Type and Description
1 save
Save access Management
changes for telnet.
2 exit
Save access Management
changes for telnet and exit
current mode.
3 cancel
Roll back changes to Remote
Mgmt.
4 enable
Enable/disable Remote mgmt
over telnet.
Boolean choice
5 type
The kind of access you want to
allow.
Unsigned integer
6 from_address Set the starting IP range, and